The CMKD-1350A Series is a high-efficiency SMD Molded Inductor in a large 13.45 mm × 12.6 mm footprint with a 5.0mm profile. This series is engineered with an Alloy iron powder core ("A" material) for maximum current density and minimal power loss.
It achieves an exceptional saturation current (Isat) of up to 75.0A and an ultra-low DCR (down to 0.7mΩ max). This combination of low DCR and high saturation makes the CMKD-1350A a premier solution for high-frequency (up to 5MHz), high-efficiency DC-DC converters in servers and multi-phase VRMs. As a surface mount power inductor, its one-piece, magnetically shielded construction ensures low EMI and low core loss. The CMKD-1350A is a leading high current power inductor.
Key Features
Extremely High Saturation Current: Rated up to 75.0A.
Ultra-Low DCR: As low as 0.7mΩ (max) for maximum power efficiency.
13mm-Class Footprint: 13.45 mm × 12.6 mm package.
5.0mm Profile: A standard height for robust power handling.
Molded Construction: Magnetically shielded for low EMI and low core loss.
High Frequency Operation: Suitable for frequencies up to 5MHz.
Halogen-Free & RoHS Compliant.
Operating Temperature: -55°C to +125°C.
Applications
The CMKD-1350A's high-current, high-efficiency design is built for demanding power systems:
Voltage Regulator Module (VRM) for servers and desktops
1
>>
Multi-phase regulators
2
>>
High-power notebook regulators
3
>>
Point-of-load (POL) modules
4
Electrical Characteristics
|
Part No. |
Inductance (L₀) (µH) (±20%) |
Test condition |
DCR (mΩ) TYP. |
DCR (mΩ) MAX. |
Isat (A) TYP. |
Idc (A) TYP. |
|
CMKD-1350A-R22M |
0.22 |
100 kHz, 1V |
0.5 |
0.7 |
75.0 |
50.0 |
|
CMKD-1350A-R36M |
0.36 |
100 kHz, 1V |
0.95 |
0.72 |
50.0 |
42.0 |
|
CMKD-1350A-R50M |
0.5 |
100 kHz, 1V |
1.15 |
1.1 |
48.0 |
38.0 |
|
CMKD-1350A-R68M |
0.68 |
100 kHz, 1V |
1.35 |
1.55 |
46.0 |
33.0 |
|
CMKD-1350A-R82M |
0.82 |
100 kHz, 1V |
1.45 |
1.67 |
39.0 |
30.0 |
|
CMKD-1350A-1R0M |
1.0 |
100 kHz, 1V |
1.9 |
2.2 |
35.0 |
26.0 |
|
CMKD-1350A-1R5M |
1.5 |
100 kHz, 1V |
2.8 |
3.3 |
33.0 |
23.0 |
|
CMKD-1350A-2R2M |
2.2 |
100 kHz, 1V |
5.0 |
4.0 |
24.0 |
15.0 |
|
CMKD-1350A-3R3M |
3.3 |
100 kHz, 1V |
5.9 |
7.0 |
22.0 |
14.0 |
|
CMKD-1350A-4R7M |
4.7 |
100 kHz, 1V |
9.0 |
8.2 |
21.0 |
13.0 |
|
CMKD-1350A-6R8M |
6.8 |
100 kHz, 1V |
14.5 |
18.0 |
16.0 |
12.0 |
|
CMKD-1350A-100M |
10.0 |
100 kHz, 1V |
19.0 |
22.0 |
12.0 |
9.0 |
|
CMKD-1350A-150M |
15.0 |
100 kHz, 1V |
23.0 |
30.0 |
10.0 |
8.0 |
|
CMKD-1350A-220M |
22.0 |
100 kHz, 1V |
51.0 |
58.0 |
6.5 |
4.5 |
|
CMKD-1350A-330M |
33.0 |
100 kHz, 1V |
84.0 |
75.0 |
6.0 |
3.5 |
|
CMKD-1350A-470M |
47.0 |
100 kHz, 1V |
116.0 |
130.0 |
5.0 |
3.0 |
Notes:
Test Conditions: All test data is referenced to 25°C ambient.
Operating Temperature Range: -55°C to +125°C (ambient plus self-temperature rise).
Isat (Saturation Current): DC current (A) that will cause L₀ to drop approximately 30%.
Idc (Rating Current): DC current (A) that will cause an approximate ΔT of 40°C.
Temperature Limit: The part temperature (ambient + temp rise) should not exceed 125°C under worst-case operating conditions.
Performance Graphs


Shape and Dimensions

Reliability
This product is qualified against a series of mechanical and endurance tests, including Solder Heat Proof, Thermal Shock, Humidity Resistance, and Vibration. (See PDF page 24 for full details).
Packaging
Packaging: Embossed Carrier Tape
Reel Diameter: 330 mm
Tape Width: 24 mm
Quantity/Reel: 500 pcs
Solder Reflow Profile
Preheat condition: 150~200°C / 60~120 sec.
Allowed time above 217°C: 60~90 sec.
Max temp: 260°C (compliant with J-STD-020D)
Max time at max temp: 10 sec.
Allowed Reflow time: 2x max
Solder paste: Sn/3.0Ag/0.5Cu
(Note: This profile is for qualification only. Actual profiles must be based on the customer's specific board design and process.)

Hot Tags: 1350 inductors, China 1350 inductors manufacturers, suppliers, factory, wire wound inductor, molding power inductor, 0624 Inductors, inductor company, smps inductor, 0412 Inductors